Skip to the page

Cost & Pricing

Ceramic Coating Cost San Francisco: 2026 Prices by Car Size

Published 8 min read

Golden Bay Detailing technician applying a ceramic coating to a Tesla Model Y door in San Francisco

Ceramic coating in San Francisco costs $599 for a sedan, $699 for a compact SUV and $799 for a 3-row vehicle with us in 2026, and that price includes a paint enhancement polish. Across the Bay Area, shops typically list professional coatings anywhere from about $800 to $2,500 or more. The spread comes from three things: how much polishing the paint needs first, how big the vehicle is, and which coating goes on.

This guide lays out our prices by vehicle size, what each price includes, and what a written quote should show. It also covers the cases where we would tell you to keep your money.

What does ceramic coating cost in San Francisco in 2026?

Most professional ceramic coating jobs in San Francisco land between about $800 and $2,500, going by what Bay Area shops typically list. The low end is a single-layer coating on a small car with light polishing. Large SUVs with multi-stage correction run higher.

Our numbers sit inside it. The Cerakote 5-year package is $599 for a sedan or coupe, $699 for a compact SUV and $799 for a 3-row. Gtechniq Crystal Serum Ultra is $1,499 and $1,699. A seasonal special is sometimes posted on our ceramic coating page, so check there before you book.

Ceramic coating San Francisco price by vehicle size

A bigger vehicle has more paint to polish and more panel to coat. We price coatings in two size groups.

PackageSedan or coupeCompact SUV
Cerakote 5-year, paint enhancement polish included$599$699
Cerakote 5-year with a 2-step correction$1,399$1,699
Gtechniq Crystal Serum Ultra (closed garage required)$1,499$1,699
Yearly Ceramic Maintenance Detail$250$300

Pro tip: Text three or four daylight photos of the car to (415) 483-5686. We usually answer with a quote in 5 to 15 minutes.

What is included at each price

Every coating job starts with a test spot. We polish one small area to see how the paint responds, then confirm the correction level before the full job. The install takes about 4 to 6 hours.

Price (sedan / SUV)CoatingPaint correctionWarranty and conditions
$599 / $699Cerakote 5-year1-step machine polish, includedOur written 5-year warranty. Yearly maintenance detail required.
$1,399 / $1,699Cerakote 5-year2-step correction for heavier swirls, as an add-onSame warranty and the same yearly maintenance rule.
$1,499 / $1,699Gtechniq Crystal Serum UltraConfirmed on your quote after the test spotClosed garage space required.

What moves the price up or down

  • Paint condition. Swirls from tunnel washes and worn wash mitts have to be polished out first, because a coating locks in whatever is under it. A paint enhancement polish is included, and a 1-step correction adds $400 on a sedan. A 2-step adds $800 on a sedan, and heavier multi-stage work is quoted from the test spot.
  • Vehicle size. A compact SUV costs $100 more than a sedan and a 3-row costs $200 more on our Cerakote package, and trucks are priced by text.
  • Coating tier. Gtechniq Crystal Serum Ultra costs $900 more than the base Cerakote package on a sedan ($1,499 against $599) and $1,000 more on an SUV.
  • Deep scratches. A scratch you can catch with a fingernail will not polish out at any price, and a coating will not hide it.

What should a ceramic coating quote list line by line?

A ceramic coating quote should list the coating by brand and product name, the paint correction level, the warranty terms, the upkeep rules and the total for your vehicle size. If yours is one line and one number, ask for the rest in writing.

  • Coating: the brand and the exact product name. The word ceramic alone tells you nothing.
  • Prep: wash, iron remover and clay bar before any polishing.
  • Correction: 1-step, 2-step or multi-stage, and whether a test spot comes first.
  • Surfaces: paint only, or paint plus glass and wheel faces.
  • Warranty: the length, who backs it, and the fix if a panel fails. Ours is our own written 5-year warranty. A failed coated panel is stripped and re-coated at our cost.
  • Upkeep: any required maintenance visit and its price. Ours is $250 a year for a sedan and $300 for an SUV.
  • Cure rules and what voids it. Ours: no washing for 10 to 14 days, and no brush tunnel washes after that.

Why are some "ceramic" deals so cheap?

Most very cheap ceramic deals are a spray sealant, not a professional coating. A spray product with some ceramic ingredients wipes on in minutes after a wash and lasts a few months. A professional coating goes on by hand in small sections over polished paint, gets leveled with a towel before it hardens, then cures for days.

A spray sealant is a fine product at a spray-sealant price. The problem is the label. If the job takes under two hours, includes no polishing and comes with no written warranty, you are buying a sealant.

What does a ceramic coating cost per year?

A Cerakote coating on a sedan costs about $370 a year across its 5-year warranty once you add the yearly check-up. The math: $599 divided by 5 years is about $120 a year, and the yearly Ceramic Maintenance Detail is $250. For an SUV, $699 over 5 years is about $140 a year, plus $300 for the maintenance detail, so about $440 a year.

Compare that with wax. Our machine wax add-on is $199 and lasts 6 to 12 months, so one or two applications run $199 to $398 a year on top of the detail it is added to. Wax is cheaper per year if you keep up with it. The coating buys easier washing and longer gaps between protection jobs.

What San Francisco does to a coating

Fog wets the paint overnight and the sun dries it by noon. The dust and salt that settled in that water stay behind as spots. San Francisco tap water is soft, so the usual cause is that wet-then-dry cycle or sprinkler overspray, not the wash water.

Street parking adds tree sap. Near the coast, bird droppings land often and etch fast. A coating buys you more time to wipe them off before they mark the clear coat. It does not stop scratches or rock chips.

Brush tunnel washes are the fastest way to waste the money. The brushes put swirls into the coating, and they void our warranty. After you coat, wash by hand.

Mobile install vs shop, and when not to coat

We install at your driveway, garage or office lot, and our van carries its own water and power. You skip the drop-off and the ride home. A closed shop controls dust and humidity better than any driveway, which is why our Gtechniq package requires a closed garage space. We do not offer shop drop-off. If you have no garage and want Gtechniq, a fixed shop is the right call.

Skip the coating if any of these fit:

  • Your lease ends soon. You pay for five years of protection and hand the car back.
  • The clear coat is failing. Peeling or chalky white patches need a body shop, and a coating will not bond to them.
  • You are about to sell. A 1-step paint correction at $399 for a sedan, or a Full Detail at $399, does more for a listing photo.
  • You plan to keep using a brush tunnel wash.

Frequently asked questions

How much is ceramic coating in the Bay Area?

Bay Area shops typically list professional ceramic coating from about $800 to $2,500 or more. Golden Bay Detailing charges $599 for a sedan, $699 for a compact SUV and $799 for a 3-row for the Cerakote 5-year package, with a paint enhancement polish included. We bring coating jobs to San Francisco, the Peninsula, Marin, the East Bay and Palo Alto.

What are ceramic coating prices near me in San Francisco?

In San Francisco our Cerakote prices are $599 to $1,399 for a sedan and $699 to $1,699 for a compact SUV, depending on the correction level. Gtechniq Crystal Serum Ultra is $1,499 and $1,699. There is no travel fee inside our service area.

Does the ceramic coating cost near me include paint correction?

It should, and you need to check. Our $599 and $699 prices include a paint enhancement polish. Some quotes list the coating alone and add polishing later, so ask for the correction level in writing. Coating over swirls seals them in.

Why are some ceramic coating near me prices under $300?

At that price the product is almost always a spray sealant that lasts a few months, applied after a wash with no machine polishing. That can be a fair deal if it is sold as a sealant. It is not the same job as a professional coating with paint correction and a written warranty.

Is ceramic coating worth it in San Francisco?

It is worth it if you plan to keep the car three years or longer, park outside, and wash by hand. It is not worth it on a lease that ends soon, on failing clear coat, or if you use brush tunnel washes. If you like waxing your own car twice a year, you may not need a coating at all.

Get your ceramic coating price by text

Send a few photos to (415) 483-5686 or use the quote form. We usually reply in 5 to 15 minutes, 8 AM to 8 PM, seven days.

Keep reading

See every guide

Get your price by text.

One minute to ask. One clear price back. No deposit on most jobs.

Text usGet my price
Text usGet my price